MOOFMENT. v4.0.5
Features Club Demo Bikes FAQ Blog Download ↗
Apps
Features Club Demo Bikes FAQ Blog Download ↗

General

What is Moofment?

Moofment is a community-driven companion app for VanMoof and Cowboy e-bike owners. Direct Bluetooth control of your bike, GPS ride tracking, turn-by-turn navigation with voice guidance, CityGuard geofenced speed zones, Moofify (peer-to-peer parts & bike listings), community events and Moofments, MoofMatch rider pairing, ferry and transit departures for 8 cities, the Hi feature for community greetings, music integration, and a scoring system, all in one app.

Which bikes does Moofment support?

VanMoof: Series 1–2 (Electrified S, X, S2, X2), Series 3 (S3 & X3), Series 4 (S4 / Electrified S2), Series 5 (S5 & A5), and Series 6 (S6 & S6 Open), all with full Bluetooth control.

Cowboy: C1–C4 and Cross. Bluetooth connection, battery + speed + power telemetry, light toggle, auto-unlock / smart lock / crash detection / theft alert toggles, plus a legal speed-cap reset (25 km/h EU pedelec default). See the Cowboy section below.

Which languages are supported?

English, German, French, Dutch, and Japanese.

Account & Authentication

How do I sign in?

VanMoof riders sign in with their VanMoof email and password. Cowboy riders sign in with their Cowboy account credentials.

Can I use Moofment without a VanMoof or Cowboy account?

No. A VanMoof or Cowboy account is required to sign in.

How do I log out?

Go to Profile > Account > Log Out. This disconnects all active Bluetooth connections, syncs your score, and clears local data.

Bluetooth Connection

My bike won’t connect. What should I do?

  • Make sure Bluetooth is enabled on your phone
  • Stand within 2–3 meters of your bike
  • Wake the bike (kick the rear wheel or press the button)
  • Close any other apps connected to your bike (including the official VanMoof app)
  • If it still fails, try force-closing Moofment and reopening

Does Moofment stay connected when I close the control sheet?

Yes, there’s a configurable keep-alive timer. When you close the control sheet, the connection stays alive for the duration you set. You can reconnect instantly when you reopen it.

What happens if the connection drops unexpectedly?

Moofment automatically attempts to reconnect up to 3 times with increasing delays (2s, 4s, 6s). If all attempts fail, the connection state resets to disconnected.

Can I export my bike credentials?

Yes. Both Series 3 and Series 5 credentials can be exported for backup or use with other tools.

Bike Control

What can I control on my bike?

Depending on your bike model: lock/unlock, power assist levels, speed limit region, light mode (off/on/auto), bell sound, alarm mode, and sound volume. Series 3 also supports the full sound board with all factory sounds.

What are the speed limit regions?

  • Europe: 25 km/h
  • USA: 32 km/h
  • Offroad: 37 km/h
  • Japan: 24 km/h

Speed region changes are for responsible use only. For example, riders in the US can use CityGuard to lower their speed limit to 25 km/h in selected areas, or use ASM in EU mode during slow traffic to save battery.

What is the Sound Board?

A fun feature for Series 3 bikes that lets you play all of your bike’s built-in sounds, bells, horns, alarms, system sounds, pairing tones, and even some hidden easter-egg noises.

Can I upload my own bell sound?

Yes, on Series 3 / X3. Record a clip or pick an audio file, preview it before uploading, adjust the volume, and it replaces the stock bell. Swap the sound whenever you like.

What does the speedometer show?

A real-time GPS-based speed reading with smoothing filters for accuracy. It also shows your battery level, odometer, and current settings.

What is the FOCUS Dashboard?

A large, readable dashboard designed for handlebar-mounted use. Shows real-time speed, battery, distance, and elevation in one view. Works across Series 1–6 plus Cowboy. Activates automatically above a speed threshold you set (default 10 km/h) or can be opened manually. During navigation it splits to show the map plus turn banner + stats; rotate your phone for a landscape variant with a wider panel.

Can I calibrate my wheel diameter?

Yes. Set your exact wheel diameter so speed, distance, and odometer readings stay accurate even if you've swapped to different tyres that change the effective diameter. Calibrate once, all downstream readings follow. Useful for S3/X3 where the ODO is firmware-computed from wheel revolutions.

Cowboy (CB)

Which Cowboy bikes does Moofment support?

C1, C2, C3, C4, C4ST, and Cross. Connection is over Bluetooth Low Energy using your Cowboy account credentials (for initial pairing) and locally stored BLE credentials afterwards.

What can I control on my Cowboy?

  • Lock / unlock
  • Toggle lights
  • Auto-unlock proximity, smart lock, crash detection, theft alert
  • Legal speed-cap reset (see below)
  • View live battery, speed, motor power, rider power, trip data
  • View bike identity (serial, model, firmware)

What is the legal speed-cap reset?

A one-way action on the Cowboy control sheet that restores your bike's motor-assist cutoff to the EU pedelec legal default of 25 km/h. This is provided as a compliance aid for riders whose bike is currently operating above that cap. Moofment does not offer any option to raise the cap.

Warranty note: Any communication with your bike's firmware may theoretically affect your Cowboy warranty. Cowboy SA's warranty terms govern whether and how warranty is impacted. A disclaimer appears before you can use the feature.

Is Moofment affiliated with Cowboy?

No. Moofment is an independent third-party application. Cowboy is a registered trademark of Cowboy SA. Moofment is not affiliated with, endorsed by, or sponsored by Cowboy SA.

Where are my Cowboy credentials stored?

Locally on your device only. Your Cowboy email and password are used once for the initial API login to fetch your bike's BLE passkey, then discarded. The BLE passkey and MAC address are stored on-device and never transmitted to any Moofment server. See the Moofment CB Privacy Policy for details.

CityGuard

What is CityGuard?

CityGuard is a geofence-based speed limit manager for responsible use. You define zones on the map (e.g., your city center or a busy area), assign a lower speed limit to each, and your bike’s speed limit automatically adjusts when you enter or leave a zone. Great for lowering your speed in pedestrian areas or saving battery in slow-traffic zones.

How do I set up CityGuard?

Open the CityGuard settings in the control sheet, create a zone by dropping a pin, set the radius (100 m to 20 km), and choose the speed limit for that zone. You can create up to 20 zones.

Does CityGuard work in the background?

Yes. It uses background location updates to detect when you cross zone boundaries, even when the app is in the background. For optimal performance, keep your bike connected with the control sheet or FOCUS Dashboard open.

Adaptive Speed Mode (ASM)

What is ASM?

Adaptive Speed Mode automatically switches your VanMoof bike's regional setting based on your speed. When you pick up pace above a threshold, it shifts to the higher region; when you slow down or stop, it drops back. ASM is VanMoof-only; Cowboy bikes have no equivalent.

Note: You must keep the app connected to your bike with the control sheet or FOCUS Dashboard open for ASM to work.

Is ASM legal on public roads?

The higher 32 km/h region may exceed the legal motor-assist cutoff for pedelec classification in your jurisdiction. The EU pedelec standard is 25 km/h (Directive 168/2013). Operating an e-bike that exceeds the legal cutoff on public roads may require insurance, registration, a helmet, and/or a driver's license, and may subject you to fines, impound, or prosecution. ASM is provided for use only on private property or where expressly permitted by local law. You are solely responsible for compliance.

Is ASM safe to use?

ASM shows a mandatory disclaimer before activation. You must acknowledge what it does, that it may affect battery life and your warranty, that you are responsible for complying with local traffic laws, and that you should only use it on private property where applicable.

Ferry & Transit

Which cities have ferry or transit data?

Amsterdam, Rotterdam, Hamburg, Berlin, Potsdam, Dresden, Konstanz, and the Stuttgart Zacke (a rack railway that carries bikes). Live departure times are fetched from the operator where available (Amsterdam GVB and Rotterdam Waterbus via OVapi); the other cities use the published schedule with a real-time countdown.

How do I see the next ferry / tram departure?

When you're within 10 km of a covered stop, a ferry or tram button appears on the Home dock. Tap it to open the departure board, which shows the next four services with route number, direction, and countdown. Live times are marked as such; estimates (schedule-based) are tagged EST.

How do I navigate to a specific stop?

Tap the ferry or Zacke pin on the map to open that stop's board, or open the Home dock card. Hit the blue Go button beneath the board; Moofment calculates a cycling route to the stop's coordinates and launches turn-by-turn.

Can I get a notification before my ferry leaves?

Yes. Enable Departure alerts under Notifications → Events. You'll get a local notification about 2 minutes before the next departure at the stop you're closest to (within 1.5 km).

How accurate are the departure times?

Live times come from the operator's own feed (OVapi for the Dutch networks), so they reflect real-time delays. Scheduled-only cities show the published timetable with a real-time countdown, if a service is delayed in reality, the countdown won't know. Always verify with the operator for critical journeys.

How do I turn off ferry pins and alerts?

Pins: Preferences → Map → Bike-Friendly Transit Pins. Alerts: Notifications → Events → Transit Departure Alerts. Toggles are independent.

Hi. Community Greetings

What is Hi?

A daily community greeting. Tap Say Hi in the Hi card on the Home dock to send a wave to every other rider in your city today. It's visible as a live count, and the most recent waves show up with the city and the time.

What gets shared?

City-level location only (not exact GPS), your bike name (shown only on your own wave so you can spot it in the list), and a timestamp. One Hi per rider per day, same daily cap for everyone.

What is auto-say-hi?

An opt-in toggle inside the Hi card. When on, the first ride of the day triggers a Hi automatically when you tap Start Ride, saves you from having to remember. Respects the same once-per-day cap, uses the same city-level sharing, and only fires on manual ride starts (not motion-detected auto-starts).

Can I turn Hi off?

Yes. Close the Hi card any time and it stops sending. The auto-greet toggle persists independently, you can leave Hi on and auto-greet off, or either combination.

Now Playing & Music

How does music integration work?

Moofment connects to Apple Music & Spotify and shows what’s currently playing in a floating pill on the control sheet. You can play/pause and skip tracks directly from the pill.

What is speed-based music?

When enabled, Moofment auto-queues songs that match your cycling speed based on BPM (beats per minute). Ride faster, get faster music.

Which music services are currently working?

The Now Playing pill works with Apple Music and Spotify.

Can I disable the Now Playing pill?

Yes. There’s a toggle card on the control sheet to show or hide the music pill.

Ride Tracking

How does ride tracking work?

Moofment uses GPS to track your rides, distance, speed, duration, elevation gain, and calories burned. Rides are classified by intensity: recovery, easy, moderate, hard, or max effort.

Does Moofment save to Apple Health?

Yes. When enabled, rides are saved as cycling workouts in HealthKit, including route data, distance, and calories.

What are territory heatmaps?

A map view that overlays every route you've ridden, color-intensity weighted by how often you've ridden each segment. Useful for spotting your regular commute, discovering gaps in your exploration, and tracking how your riding footprint grows over time. Opens from the Map tab.

What are range circles on the map?

An estimate of how far you can ride and still make it home, drawn as two circles on the map, a one-way reach and a round-trip reach. The estimate adjusts for your bike's battery level, your typical ride style, terrain elevation, temperature, and wind when weather data is available. Enable under Preferences → Map → Range Circle.

What is the elevation overlay?

An alternative map layer that color-codes your ridden routes by gradient steepness, green for flat, yellow for moderate, orange for steep, red for very steep. Helps you see which routes have been battery-draining climbs versus easy flats. Enable under Preferences → Map → Elevation Overlay.

Live Activities

What are Live Activities?

A real-time widget that shows your speed, battery level, and ride stats on the Lock Screen and the Dynamic Island (iPhone 14 Pro and later). Starts automatically when you connect to a bike or enter FOCUS mode.

Which bikes support Live Activities?

VanMoof S6 and Cowboy models. Other series don't expose the live telemetry needed to drive the activity.

Why does my Live Activity show 0 km distance?

Distance only updates while a ride is actually being recorded. Connecting to your bike starts the Live Activity (speed + battery), but the distance field stays at zero until you tap Start Ride in the FOCUS view, or until Ride Tracking's auto-start triggers.

How do I turn Live Activities off?

iOS Settings → Moofment → Live Activities. Or inside the app: Preferences → Connection → Live Activities toggle, with a separate Ride Only toggle if you only want them during active rides.

MoofMatch

What is MoofMatch?

MoofMatch connects VanMoof bikes in the area who want to ride together. Enter your preferences (when, how long, what type of ride), and Moofment matches you with compatible riders nearby.

How does matching work?

The algorithm checks: same city, overlapping time slots, similar ride duration, and compatible riding category. When a match is found, a Moofment event is automatically created with a suggested meeting point.

Moofify

What can I list and share?

Complete bikes and individual parts. Listings include photos, price, condition (Excellent/Good/Fair/Needs Repair), and location.

How do I list my bike?

Go to the Moofify tab > List Bike. Fill in your bike details, set the price and condition, add photos, and publish. You earn 10 boost points for listing.

Is Moofment responsible for transactions?

No. Moofment is a platform that connects listers and interested riders. All transactions, shipping, and payments happen between the two parties. Review the Moofify terms before listing.

Events & Moofments

What are Moofments?

Moofments are community events that bring bikes together. Organize a group ride, a meetup at a local spot, or a workshop, the idea is to get the bikes out and riding together.

How do I create a Moofment?

Tap the “+” button on the main screen and select “Create Moofment.” Set the time, location, description, and publish. You earn 25 boost points for creating an event.

What is the Mayor system?

Bikes that frequently show up at specific locations earn “Mayor” status, a local recognition for being a regular presence in that area.

Scoring & Gamification

How does the point system work?

You earn Boost Points by using the app:

  • Opening the app daily: 10 points
  • RSVP to an event: 10 points
  • Joining MoofMatch: 10 points (max 3/week)
  • Listing on Moofify: 10 points
  • Creating an event: 25 points
  • Hype event: 20 points

What are the tiers?

TierPoints
Kickstarter0 – 499
Cruiser500 – 1,499
Smart Rider1,500 – 2,999
Booster3,000 – 5,999
Legender6,000+

Analytics

What cycling analytics are available?

  • Weekly distance chart with adjustable range
  • Yearly distance comparison with bike-type filtering
  • Month comparison card
  • Year heatmap of riding days
  • Riding-days pattern
  • Bike comparison (if you ride more than one)
  • Rides breakdown by category
  • Battery efficiency charts
  • Destinations and cities you've explored
  • Personal records
  • Last route preview
  • GPS insights (elevation, pace, intensity)
  • Ride inbox with unconfirmed HealthKit workouts
  • Daily ride check-in prompts
  • Weather-aware ride suggestions

Card order is customizable (Analytics top bar → Reorder), and you can hide cards you don't use. On iPad, cards render in a two-column layout.

Widget

Is there a home screen widget?

Yes. A small widget that shows your bike name, battery level, and odometer. It updates roughly every 15 minutes when iOS gives it a chance. Multiple bike sizes are supported.

What about Dynamic Island and Lock Screen?

Live Activities cover those surfaces, see the Live Activities section below.

Home Assistant Integration

What does the Home Assistant integration do?

Moofment can push your bike's state, battery level, lock status, speed mode, odometer, connection status, directly to your Home Assistant instance. Your bike becomes a device in your smart home, so you can automate lights, notifications, or dashboards around it.

How do I set it up?

Profile → Preferences → Home Assistant group. Enter your Home Assistant URL (local or Nabu Casa), tap Configure Token to paste a long-lived access token, and tap Test Connection. When the test passes, Moofment starts pushing state every time it has fresh data from the bike.

Where are my tokens stored?

In the iOS Keychain, device-local. The token is never transmitted to any Moofment server, only to the Home Assistant URL you configured.

Privacy & Security

Does Moofment track my location?

Only when you explicitly enable CityGuard (geofencing) or ride tracking. Location data stays on your phone unless you choose to share it.

Where is my data stored?

Your data stays on your phone. Bike credentials are stored in the iOS Keychain. Only anonymous data is shared for Moofments, MoofMatch, and Moofify, and that data lives in Apple's secure iCloud infrastructure. No third-party servers are used.

VanMoof Error Codes

A complete reference of VanMoof diagnostic error codes. These codes may appear on your bike's display or in the Moofment app diagnostics. Applies to Series 1–5.

Battery Errors (0–21)

Code Name Description
0BAT_SCPShort circuit protection (main battery)
1BAT_MOTPMOSFET over temperature protection
2BAT_PDSCPPre-discharge short circuit protection
3BAT_PDOCPPre-discharge overload circuit protection
4BAT_UVP2Under voltage protection 2, try charging longer
5BAT_UVP1Under voltage protection 1
6BAT_OVP2Over voltage protection 2
7BAT_OVP1Over voltage protection 1
8BAT_COCP1Charge over current protection 1
9BAT_COCP2Charge over current protection 2
10BAT_DOCP2Discharge over current protection 2
11BAT_DOCP1Discharge over current protection 1
12BAT_CUTPCharge under temperature, too cold to charge
13BAT_COTPCharge over temperature, too warm to charge
14BAT_DUTPDischarge under temperature, too cold to ride
15BAT_DOTPDischarge over temperature, too hot to ride
16BAT_FPPermanent fail (fuse burn), likely socket short circuit
17BATTERY_NO_DSGCould not set discharge mode
18BATTERY_MISSINGBattery not recognized or absent
19BATTERY_COMMBattery communication error (Modbus)
20BATTERY_NO_OUTPUTBMS shutdown, sudden battery power loss
21NO_CHARGE_CURRENTCharging state but no current reported

Module & Communication Errors (22–39)

Code Name Description
22MOTOR_COMMMotor chip communication error (SSP TI)
23BLE_COMMBluetooth chip communication error (SSP BLE)
24OAD_ABORTOver-the-air update transfer aborted
25OAD_CRCOTA image CRC checksum error
26OAD_TRANSFEROTA file transfer took too long
27OAD_PACKNo or invalid file in firmware pack
28ICF_TIMEOUTTimeout during flash programming
29ICF_HEADERFlash header not found
30ICF_NO_FILESNo files in firmware pack
31ICF_ERASEFlash erase error
32ICF_WRITEFlash write error
33ICF_CRCFile in pack has CRC error
34PGM_MOTORWAREMotor controller programming failed
35PGM_BATTERYWAREBMS controller programming failed
36PGM_SHIFTERWAREShifter controller programming failed
37PGM_BLEWAREBLE controller programming failed
38INTERNAL_BATTERYModule battery read error, check battery module charging
39READ_LIGHT_SENSORLight sensor I2C read error

Button & Mechanical Errors (40–44)

Code Name Description
40STUCK_HORNBell button pressed too long, possible water or short circuit
41STUCK_BOOSTBoost button pressed too long, possible water or short circuit
42KL_COIL_MISSINGKick Lock coil not detected
43SHIFTER_NOT_IN_GEARGear not reached after 10 attempts
44SHIFTER_COMME-shifter communication error, most common VanMoof error

Motor Errors (45–53)

Code Name Description
45MOTOR_CABLEMotor cable not connected / motor not recognized
46MOTOR_OVER_CURRENTMotor over temperature or over current detected
48MOTOR_CONTROLLERMotor controller error, may require motor replacement
49MOTOR_CURRENT_ERRCurrent offset calculation deviates from default
50MOTOR_VOLTAGE_ERRVoltage offset calculation error
51MOTOR_DERATINGMax current limited due to high temperature
52MOTOR_TORQUE_FAILTorque sensor failed
53MOTOR_NOT_READYMotor not ready during motor test

SIM & Connectivity Errors (54–58)

Code Name Description
54NO_SIMCARDSIM card not detected
55I2C3_FAILI2C bus 3 communication error on startup
56CCID_SIMCARDSIM card has wrong CCID number
57READ_SIMCARDSIM card detected but no communication
58GSM_MODEMModem startup sequence failed, often resolves after reset

Other Codes

Code Name Description
60FACTORY_MODEFactory firmware is loaded, bike needs production firmware

What should I do when I see an error code?

First, try resetting your bike by holding the power button for 10 seconds. If the error persists, connect with Moofment to check diagnostics via Bluetooth. Many errors (especially 40, 44, 58) resolve after a reset. For battery errors (0–21), make sure your bike is charged and not in extreme temperatures. For motor errors (45–53), the bike may need physical service.

Troubleshooting

What is Error 44?

A known VanMoof Bluetooth communication error. If you see it, try: disconnect and reconnect, restart the bike, or restart the app.

The battery reading seems wrong.

Moofment uses a rolling median filter to smooth out erratic BLE battery readings. If the battery jumps more than 5% between readings, the spike is filtered out. Give it a few seconds to stabilize after connecting.

My bike shows “stale” values.

When first opening the control sheet, Moofment shows cached values from your last session (with a subtle pulse animation). Once the Bluetooth connection is established, fresh values replace the cached ones.

I can’t change the speed limit / regional setting.

Make sure your bike is connected and authenticated. If you recently changed your encryption keys (e.g., reinstalled the app), you may need to re-register with the bike by connecting through the official VanMoof app first, then reconnecting via Moofment.

Features

What is Mooflet?

Mooflet is an alternative app for VanMoof S5 and A5 e-bikes. It connects to your bike via Bluetooth and lets you control settings, track rides, and monitor battery, all without the official VanMoof app. Available on both iOS and Android.

What can I do with Mooflet?

  • Lock and unlock your bike
  • See battery level, odometer, and signal strength
  • Change power level (Off, 1, 2, 3, 4)
  • Change light mode (Off, On, Auto)
  • Change bell sound (Ding Dong, Party Horn, Ping, Sonar)
  • Set speed limit region (EU 25, US 32, Japan 24 km/h)
  • Enable Adaptive Speed Mode (ASM)
  • Track rides with GPS (speed, distance, duration, elevation)
  • Control music playback from the dashboard
  • Save rides to Apple Health or Google Health Connect

Speedometer & Dashboard

When connected, the home screen shows a large speedometer displaying your current GPS speed in km/h. The speed text turns red if you exceed your set speed limit.

Below the speed you’ll see:

  • Battery level with color coding (green = good, orange = below 30%, red = below 15%) and a delta showing how much it changed since you opened the app
  • Odometer in km with a session delta
  • Ride timer when a ride is active
  • Signal strength indicator (4 bars from green to red based on Bluetooth signal)

Lock & Unlock

Tap the lock control to lock or unlock your bike. If the bike is locked, tapping immediately unlocks it. If unlocked, a picker appears to choose between locked and unlocked states. Haptic feedback confirms the action.

Power Level

Controls the motor assist level. Choose from Off, Level 1, Level 2, Level 3, or Level 4. Higher levels give more motor assistance but use more battery.

Lights

Set the bike’s lights to Off, On, or Auto. Auto mode uses the bike’s built-in light sensor to turn lights on and off automatically.

Bell Sound

Choose between four bell sounds: Ding Dong, Party Horn, Ping, and Sonar. The bell is triggered by the physical button on your bike.

Speed Limit & Regional Settings

What are the speed limit regions?

VanMoof S5/A5 bikes have region-based speed limits that determine the maximum speed the motor will assist you:

RegionSpeed Limit
EU25 km/h
USA32 km/h
Japan24 km/h

Mooflet lets you switch between these regions from the speed limit picker on the home screen.

Why can’t I change the speed limit?

See the Certificate & Authentication section below. Speed limit changes require your app to hold the primary certificate on the bike.

Adaptive Speed Mode (ASM)

What is ASM?

Adaptive Speed Mode automatically adjusts your bike’s speed limit based on how fast you’re riding, using your phone’s GPS. Instead of being locked to one speed limit, the bike dynamically switches between EU (25 km/h) and USA (32 km/h) limits depending on your current speed.

How does ASM work?

ASM monitors your GPS speed in real time and uses two thresholds with hysteresis to prevent rapid switching:

  • Speeding up: When your GPS speed exceeds 22 km/h, the bike switches to the USA limit (32 km/h), giving you more motor assist at higher speeds
  • Slowing down: When your GPS speed drops below 9 km/h, the bike switches back to the EU limit (25 km/h)
  • Stopped: When your speed drops below 1 km/h, the bike immediately resets to EU (25 km/h)

The hysteresis gap (9 to 22 km/h) means the bike won’t constantly switch back and forth when you’re riding near a threshold. Changes are also debounced by 300 ms to prevent rapid fluctuations.

Moofment offers more granular ASM options compared to Mooflet.

How do I enable ASM?

Open the speed limit picker on the home screen and select “Adaptive Speed Mode.” The first time you enable it, a disclaimer screen explains how ASM works and asks you to acknowledge:

  • The speed thresholds and behavior
  • That it may affect battery life
  • That you’re responsible for following local traffic laws

Tap “I Understand, Enable ASM” to confirm.

What should I know when using ASM?

  • You must keep the app open and connected to your bike for ASM to work. A warning banner at the top of the controls reminds you of this.
  • If you select a manual speed limit, ASM is automatically disabled.
  • If the bike disconnects, ASM stops and the last-set speed limit remains.
  • ASM requires the primary certificate, see the certificate section below.

Why does ASM require the primary certificate?

ASM works by sending regional setting commands to the bike based on your GPS speed. Under the hood, it’s calling the same command as manually changing the speed limit. If your app’s certificate is secondary, the bike silently ignores these commands and the speed limit never actually changes, even though the app shows ASM as enabled.

Ride Tracking

How does ride tracking work?

Mooflet automatically tracks your rides using GPS when connected to your bike:

  • Auto-start: A ride begins when your GPS speed exceeds 5 km/h
  • Auto-stop: A ride ends when you stay below 1 km/h for 30 seconds

During a ride, the dashboard shows real-time statistics:

  • Duration, elapsed ride time
  • Distance, total distance traveled
  • Average speed, distance divided by time
  • Top speed, highest speed reached
  • Ascent, total meters climbed
  • Descent, total meters descended

How accurate is the GPS tracking?

Mooflet uses high-accuracy GPS positioning and applies several filters:

  • Location updates with accuracy worse than 20 meters are discarded
  • Distance jumps larger than 100 meters between updates are ignored (GPS glitches)
  • Speed is smoothed using an exponential moving average
  • Speeds below 3 km/h are treated as stationary to filter GPS drift

What are the minimum requirements to save a ride?

A ride is only saved if it meets both:

  • At least 500 meters distance
  • At least 60 seconds duration

Short movements (walking to a store, repositioning the bike) are automatically filtered out.

Music / Now Playing

How does the music player work?

When enabled, a compact now playing card appears at the bottom of the home screen showing:

  • Album artwork (or a music note icon if unavailable)
  • Track title and artist
  • A playback progress bar
  • Play/pause button

You can also swipe the card left to skip forward or right to go back.

How do I enable the music player?

Go to Settings and toggle on “Music Player.”

  • iOS: Mooflet uses Apple’s Now Playing integration. Permission is requested during onboarding.
  • Android: Mooflet reads currently playing music from system notifications. This requires Notification Listener permission, which you’ll be prompted to enable in system settings.

Why can’t I see the music player?

The now playing card only appears when:

  • The music player toggle is enabled in Settings
  • Music is currently playing (or was recently playing) on your device
  • The necessary permissions are granted

Health Integration

Apple Health (iOS)

When enabled in Settings, Mooflet automatically saves completed rides as cycling workouts to Apple Health. Each workout includes:

  • Start and end time
  • Total distance
  • Estimated active calories burned (~35 cal/km)
  • Average speed
  • Elevation gain and loss

Your health data stays on your device and is never uploaded anywhere.

Google Health Connect (Android)

Mooflet integrates with Google Health Connect to save cycling workouts. Each workout includes:

  • Exercise session (type: cycling)
  • Total distance
  • GPS route with coordinates and altitude
  • Duration

To set up, go to Settings and tap “Google Health Connect” to grant the necessary permissions. Google Health Connect must be installed on your device.

Connection & Bluetooth

How does Mooflet connect to my bike?

Mooflet uses Bluetooth Low Energy (BLE) to communicate with your VanMoof S5 or A5. When you log in with your VanMoof account, the app retrieves your bike’s encryption keys from VanMoof’s servers and uses them to authenticate over Bluetooth.

What does the signal strength indicator mean?

  • 4 bars (green): Excellent signal, very close to bike
  • 3 bars (yellow): Good signal
  • 2 bars (orange): Fair signal, may experience delays
  • 1 bar (red): Weak signal, connection may drop

What is Auto Connect?

When enabled in Settings, Mooflet automatically connects to your last-used bike when you open the app. Disable this if you prefer to connect manually.

Can I use Mooflet with multiple bikes?

Yes. If your VanMoof account has multiple bikes, you can switch between them in Settings. Tap your bike name to see all available bikes and select a different one. The app will disconnect from the current bike and connect to the new one.

The app keeps the screen on while connected, is that normal?

Yes. While connected to your bike, Mooflet prevents the screen from turning off so you can always see your speed and controls while riding. The screen lock returns to normal when you disconnect.

Settings

Theme

Choose between Dark, Light, or System appearance. System mode follows your device’s current dark/light mode setting.

Haptic Feedback

When enabled, you’ll feel a subtle vibration when locking/unlocking and changing settings. Disable this if you prefer no haptic response.

Clear Certificates

In Settings under Debug, you can clear cached Bluetooth certificates. This forces the app to re-negotiate authentication with the bike on the next connection. Use this if you’re experiencing persistent connection issues.

Sign Out

Signs out of your VanMoof account, clears all local data (credentials, bike info, preferences), disconnects from the bike, and returns to the login screen.

Certificate & Authentication

How does S5/A5 BLE authentication work?

The bike uses certificate-based authentication. Each app generates a key pair, sends the public key to VanMoof’s API, and receives a signed certificate back. This certificate is then presented to the bike during BLE connection. The bike verifies the certificate signature and grants access.

Why can’t my app change regional settings (speed limit)?

The bike treats regional settings as a privileged command. Only the primary certificate, the first certificate ever registered on the bike, has permission to change regional settings. Any subsequent certificates from other apps are treated as secondary and can lock/unlock, read state, change lights, bell, power level, etc., but cannot change regional settings. The bike silently ignores the command with no error response.

How do I know if my certificate is primary or secondary?

There is no BLE command to query certificate privilege level. The only indicator is behavioral: if set regional setting commands produce no topic response from the bike, your certificate is secondary. Primary certificates get an immediate topic update confirming the change.

What commands work with a secondary certificate?

  • Lock / Unlock
  • Read all bike state (battery, odometer, speed mode, light, bell, etc.)
  • Change power level (1–4)
  • Change light state (on/off/auto)
  • Change bell sound
  • Subscribe to all topics
  • Read regional settings (but not write)

Can two apps share the same certificate?

Yes. If both apps are signed by the same Apple Developer Team, they can share it. Mooflet and Moofment share it, therefore you can use them both if you like.

Whichever app runs first generates the key. The other finds and reuses it. Same key = same certificate = same bike permissions.

Can two apps share the same certificate on Android?

Not easily. Android’s KeyStore is sandboxed per app. In practice, if only one Android app talks to the bike, it naturally becomes the primary certificate holder.

Can iOS and Android apps share the same certificate?

Not directly. The bike doesn’t care about platform, it cares about the certificate. If someone uses Moofment on iOS and Mooflet on Android on the same bike, they have two different certificates, and only the first-registered one gets regional settings privileges. Solving this requires syncing the private key across platforms (export, cloud sync), which has security implications.

How do I make my app the primary certificate?

Options:

  • Factory reset the bike, clears all certificates, then the first app to connect and authenticate becomes primary
  • Only use one app from the start, never register another app first
  • Share the primary app’s keychain (iOS only), use a shared keychain access group to reuse the existing primary certificate

Does the bike have a certificate limit?

The exact limit is unknown, but the bike accepts multiple certificates. Each certificate gets independent authentication but different privilege levels.

Troubleshooting

The app connects but shows wrong battery/odometer values

Try clearing certificates in Settings > Debug > Clear Certificates, then reconnect. This forces a fresh authentication and topic subscription.

Speed limit changes don’t work

Your certificate is likely secondary. See “Why can’t my app change regional settings?” above for details and solutions.

ASM is enabled but the speed limit doesn’t change while riding

Same as above. ASM requires the primary certificate to send regional setting commands. If your certificate is secondary, the bike silently ignores all speed limit changes from ASM.

The app won’t connect to my bike

  • Make sure Bluetooth is enabled on your phone
  • Make sure you’re within range of the bike (ideally within 5 meters)
  • Try closing and reopening the app
  • Try clearing certificates in Settings and reconnecting
  • Make sure no other app is actively connected to the bike

Rides aren’t being saved to Apple Health / Google Health Connect

  • Check that health integration is enabled in Settings
  • Verify you’ve granted the necessary health permissions
  • Rides must be at least 500 meters and 60 seconds to be saved
  • On Android, make sure Google Health Connect is installed

Music player doesn’t show anything

  • Make sure the music player is enabled in Settings
  • Start playing music in any app (Spotify, Apple Music, etc.)
  • On Android, verify Notification Listener permission is granted for Mooflet

Technical Notes

Android foreground service

On Android, Mooflet runs a foreground service for GPS tracking while connected. This shows a persistent notification (“Mooflet – Tracking your ride”) and is required by Android to access GPS in the background. The notification cannot be removed while tracking is active.

Data privacy

Mooflet stores all data locally on your device:

  • Bike credentials in the device keychain/keystore
  • Ride data is only saved to Apple Health or Google Health Connect (never to external servers)
  • GPS data is used only for speed display and ride tracking, never uploaded
  • VanMoof account credentials are stored securely in the device keychain

Legal

Mooflet is an independent third-party app. VanMoof is a trademark of VanMoof B.V. Mooflet is not affiliated with, endorsed by, or connected to VanMoof or its parent company.

We use cookies from Google Analytics for traffic insights. No cookies are set until you choose. Privacy policy.